Denon DCD-201SA Operating Instructions Manual page 8

ENGLISH
(3) Names and Functions of Remote Control Unit Buttons
Buttons not explained here function in the same way as the corresponding buttons on the main unit.
2
(Refer to pages 3 and 6.)
Call button (CALL)
Press this to check the pro-
grammed tracks.
Disc holder open/close button
( 5 OPEN/CLOSE)
Number buttons (1 to 10)
Use these for direct search and
programming.
Power button (POWER)
NOTE:
• When the DCD-201SA is con-
nected in a system with the
201SA series, the DCD-
201SA's power cannot be
switched between the on and
standby modes using the
power button on the remote
control unit.
Play button ( )
1
Pause button ( 3 )
Stop button ( 2 )
Manual search reverse button
( 6 )
Manual search forward button
( 7 )
8
Program button
(PROGRAM)
Press this for programmed
playback. (Refer to page 12.)
CALL PROG DIRECT
1 2 3 Direct button (DIRECT)
4 5 6 7
Press this for direct playback
(Refer to page 12.)
8 9 10 +10
TIME
+10 button
POWER
Press this to select track
REPEAT
numbers of over 11.
RANDOM
Time button (TIME)
REMOTE CONTROL UNIT RC-268
Repeat button (REPEAT)
Press this for repeat playback.
(Refer to page 13.)
Random button (RANDOM)
Automatic search forward
button ( 9 )
Automatic search reverse
button ( 8 )
(4) Names and Functions of System Remote Control Unit Buttons (The RC-906 is included
with the PMA-201SA.)
The CD related buttons on the system remote control unit included with the pre-main amplifier are explained below.
2
Buttons not explained here function in the same way as the remote control unit on the main unit.
2
Power standby button
(SYSTEM POWER STANDBY)
Press this button to switch the
system power standby mode.
(You can not switch this unit
independently.)
1 to 10 (number buttons) and
+10 button (1~10, +10)
TIME button (TIME)
Dolby NR
Play/pause button ( / )
1 3
Stop button ( )
2
Automatic search forward
buttons ( 9 )
Automatic search reverse
buttons ( )
8
TAPE
Function selector switch
Switches the operation of the
buttons.
When you want to operate the
CD, switch to the CD position.
Power on button
(SYSTEM POWER ON)
Press this button to switch the
system power on mode.
You can not switch this unit
independently.
OFF ON
PROG/DIRECT button
SYSTEM
(PROG/DIRECT)
POWER
PROG /
DIRECT
CALL button (CALL)
1 2 3
CALL
4 5 6
CLEAR button (CLEAR)
CLEAR
7 8 9
Press this to clear programmed
RANDOM REPEAT
10 +10
tracks. The last track in the
CD SRS
TIME EDIT
CD-R TAPE MD
program is cleared each time the
button is pressed.
REV. TIME/
DIMMER
MODE PANEL
RDS BAND TUNING
REPEAT button (REPEAT)
STOP PLAY VOLUME
/SELECT
RANDOM button (RANDOM)
PRESET
+
Time edit button (TIME EDIT)
-
Press this to perform edited
recording according to the length
TAPE
SLEEP FUNCTION MODE
of the cassette tape. (See page
15.)
CD
TUNER
MD
Manual search forward buttons
CD-R
( )
7
Manual search reverse buttons
( )
6
RC-906
REMOTE CONTROL UNIT