7.
Brightness
Picture brightness can be adjusted by
changing the brightness value. It comes
with 128 as default. Increasing and de-
creasing the 128 much more will cause
saturation on the picture, so it is critical to
adjust this to a value for a good not done
image quality. It changes between 0 and
255.
8.
Auto Config
Auto Config function enables DS Monitor to
adjust resolution automatically in VGA mode.
9.
Exit
Exit function closes the menu.
closes automatically. But if any operation has been
made in the MENU,it closes after 10 seconds if
there is no operation.
NOTE: If the display has a power cycle all settings
are lost and the unit returns to the default "User"
setting.
English - 12 -
The MENU, after 30 seconds