Audiovox DVD Home Theater System Owner's Manual page 17

To select the listening channel
1. When the disc is stopped, you can press 5.1 CH and 2.1 CH buttons on the remote control to select different
speakers output status shown as below table.
2. At AV_IN function mode, you also can press the
select 3 STEREO,
output status, Details please refer to below listed table.
3. You can active or off subwoofer output by setup menu.
Note:
The wording "2.1 CH" will be corresponded to the audio/sound output from Front Left and Front Right speakers
plus the Subwoofer.
The following tables show which speakers are working in the various modes.
Audio Settings
DISC
5.1 CH /
Subwoofer
2.1 CH
5.1 CH ON
5.1 CH OFF
DVD
CD
2.1 CH ON
2.1 CH OFF
N/A ON
MP3
N/A OFF
Audio Settings
Sources
3 Stereo /
Subwoofer
Pro Logic
TUNER N/A
Pro
Logic
AV_IN 3 Stereo
OFF
REMARKS:
1) Generally, only Front Left, Right speakers and Subwoofer are active at TUNER mode.
2) " " The speakers is activated.
X
3) " " The speakers is not activated.
4) Always keep your VCR in stereo mode otherwise the speakers output status may be different to above listed table.
5) You can only set 5.1 CH, 2.1 CH when the disc is stopped.
6) In Subwoofer On mode, if speaker is set to "Large", then the output of subwoofer is low.
Adjusting the Sound
PRO LOGIC (indicator on the front panel will illuminate) or OFF three different speakers
L/R Front Left
Speaker Speaker
Small
Large
Small /
Large
Small /
Large
Small /
Large
Small /
Large
Small /
Large
L/R Front Left
Speaker Speaker
N/A N/A
ON Small
ON Large
Small /
OFF
Large
ON Small
ON Large
Small /
OFF
Large
Small /
ON
Large
Small /
OFF
Large
PRO LOGIC button repeatedly on the remote control to
Speakers Output Status
Front Right Center
Subwoofer
Speaker Speaker
X
X
X
X
Speakers Output Status
Front Right Center
Speaker Speaker
X
X
X
Rear Left Rear Right
Speaker Speaker
X
X
X
X X
X
X X
Rear Left Rear Right
Subwoofer
Speaker Speaker
X
X
X
X
X X
X X
X
X X
X
X
X
X
X
X
X
X
X
X