Mechanical Installation - Electrolux W365H Installation Manual

Mechanical installation

• Mark and drill 2 holes (ø 8 mm) about 40 mm
Fig.
1
deep (W365-W305) and ø 0 mm and 50 mm
deep (W330-W3240) in the positions shown.
A
W365H 495 460 0 30 375 70 40 00
W375H 495 460 0 30 375 70 40 00
W305H 575 465 30 40 455 85 35
W330H 635 490 35 75 55 95 60 0
W380H 75 545 25 205 595 85 60 5
W3240H 790 65 5 80 670 75 60 5
W3300H 903 835
= position of feet
= drilling points for expander bolts
• The machine shall be lifted in the bottom
frame.
• Place the machine over the two drilled holes.
• Check that the machine is placed in level.
Adjust with the feet.
It is of utmost importance that the machine
is placed in level, from side to side as well
as front to rear. If the machine is not pro-
perly leveled, it may result in out-of-balance
without a real out of balance in the drum.
• Insert the expansion bolts supplied in the
holes drilled in the floor. Fit the washers and
nuts, and tighten well.
Installation
B C D E
60 80 670 75 60
1
D
F G H
95
G
75
A
C
F
E
Front
438 9143-01/05
4:
B
H
5358