Door Station Mounting; Dt601/Id/Fe Mounting - V-Tec DT601 User Manual

• Lock Control Jumper: To select the lock type.
• Main Connect Port: To connect the bus line and the electronic locks.
• BUS: Connect to the bus line, no polarity.
• PL: External lock power input, connect to the power positive(power +).
• S+: Lock power(+) output.
• S-: Lock power(-) output, connect to the power(-) input of locks(only when using the door
station to power the locks, if using the external power supply for the locks, the S- will not be
connected).

3.Door Station Mounting

DT601/ID/FE Mounting

1
Drill holes in the wall to match the size of
screws and attach the rainy cover to the wall.
3
Attach the panel to the rainy cover
2
Connect the cable correctly
4
Use the screwdriver and the screw
to fix the panel
-3-