Sanyo DVD-DX500 Service Manual page 4

Hide thumbs Also See for DVD-DX500:

CIRCUIT OPERATIONAL DESCRIPTION

DVD Module

. Summary

DVD One Board consists of: Loader part that reads and transmits audio and video data saved

at Optic Discs (DVD, CD-DA, VCD, CD-R) to MPEG Decoder part; MPEG Decoder part, which,

by decoding and encoding data received from the Loader, produces analog signals; and u-Com

that controls the overall system including the loader and MPEG decoder.

2. How Does it Operate

Insert the power cord and then power transmitted to each IC, and the SET will be the STAND-

BY status which requires the least power for input the front panel key, input the STAND BY/

ON key, extinguished the LED. Once the Power On key is entered, u-Com recognizes it and

initiates each chipset, performs sequential algorithms such as determining whether the disc

is in or not, and if in, what type of disc is loaded.

Through this process, it can read disc data before transmitting it to the MPEG Decoder. The

MPEG Decoder will then decode and encode such data before generating the final analog

audio and video signal outputs.

Sm(SANYO_DVD-DX500)051220.indd

DVD-MODULE Block Diagram

2005-12-29

8:58:36

Table of Contents

Dvd-dx510