Optelec clearview speech User Manual page 9

Optelec ClearView Speech
Step 4:
Tap the screen to activate the document capture process and
start the speech. This can take approximately 15 to 20
seconds.
Step 5:
The speech will start reading the document and the document
zones will be marked on the screen with large blue numbered
bullets. Tap a bullet to start reading the specific text zone.
Step 6:
Press the pause button to pause the speech.
Step 7
Select another zone by tapping once on another blue bullet.
Photos are displayed in the original colors. To view photos
magnified, tap it once. To return to the full page view, tap the
photo once again.
Step 8:
Tap the button marked with the "X" on the right end of the button
bar to return to ClearView+ mode. Tap and hold the button
marked with the "X" on the right end of the button bar to capture
a new page.
Page 7