Advertisement
Available languages
Available languages
How to Use Your Range
HOW TO ADJUST THE FLAMES AND OVEN PILOT
If the range has yellow flames, it may
require adjustment to the air shutters:
• How to adjust the air for surface burners:
1
Remove the
knobs.
NOTE: Because of different altitudes above sea level and variations
in the supply of gas, you may need to adjust the main air intake
to the burners. This will result in a better air-gas mixture and thus
a better operation.
• The models with thermostat have a pilot in the oven burner,
to adjust it:
1.- Without the manifold panel, locate the adjustment screw on
the thermostat, see the illustration on the right side.
2.- Remove the oven tray (see page 12) and turn the knob
approximately 30° until you feel a small stop,
turn the oven pilot on with a match or a lighter.
Pilot Position
3.- With a flat and thin screwdriver turn the adjustment screw
until you get a flame approximately 3/8" tall.
4.- Replace the manifold panel, screws and knobs.
2
Unscrew the screws
of front and below the
manifold panel and
remove it.
NOTE: Do not obstruct the gas
exhaust of the oven or broiler
3
Adjust the air shutters
individually. Light the
burner, then push or pull
the air shutter until you
get a blue flame.
ADJUSTABLE FLAT SCREW
FOR THE OVEN PILOT
7
Advertisement
