Table of Contents
Advertisement
REPLACING FUSES:
Fuses are located in the dash and by the main disconnect.
1. Locate the applicable fuse block and remove fuse from fuse block.
2. Inspect the fuse and discard fuse if element is broken or fuse is damaged.
Replace fuses with those of correct amperage or electrical system could be damaged.
3. Install new fuse with correct amperage rating.
Fuse F1 – (500 amp) Main Disconnect
CLEANING AND REPAIRING METAL SURFACES:
Cleaning:
Follow automotive practices to care for your vehicle painted metal surfaces. Use a high-quality automotive wax
regularly to maintain the factory look of your vehicle's painted surfaces.
Repairing Minor Scratches (surface scratch):
1. Clean area to be repaired thoroughly.
Avoid damage! Do not use rubbing compound on painted surfaces.
2. Use automotive polishing compound to remove surface scratches.
3. Apply wax to entire surface.
GENERAL SERVICE
F1
F2
F3
Fuse F2 – (10 amp) Motor Controller
Fuse F3 – (10 amp) Head Lights, Running
Lights, Brake Lights, Horn, Strobe Light,
Backup Alarm, Backup Lights
SECTION 4
SERVICE
4-3
Advertisement
Table of Contents
