Oldenbourg group euv-400 Parts And Service Manual page 13

HANDLE SAFELY - AVOID FIRES
Prevent fires by keeping machine clean of accumulated grease, and debris.
Store flammable fluids away from fire hazards. Do not incinerate or puncture pressurized containers.
Do not store oily rags; they can ignite and burn spontaneously.
Keep all fire extinguishers in operational condition.
Alert mine personnel of any fire hazards.
USE CAUTION WHEN WELDING
Disconnect batteries prior to performing any welding procedure.
Disconnect all cables and wiring to the Sevcon motor controller
prior to performing any welding procedure.
Always use proper protective clothing and devices when welding.
STAY CLEAR OF ROTATING DRIVELINES
Be alert when working around rotating drivelines. Entanglement in rotating driveline can cause serious injury or
death.
Tie long hair behind your head. Do not wear a neck tie, scarf, necklace, or loose fitting clothing when working
around operating machine. These items can get caught and pull you into moving parts, resulting in severe injury
or death.
Stop engine and be sure driveline is stopped before performing maintenance.
PRACTICE SAFE MAINTENANCE
Understand service procedure before doing work. Read appropriate technical manual first. Keep work area
clean and dry.
Never lubricate or service machine while it is operating or moving. Keep hands, feet, hair, and clothing clear of
rotating parts. Disengage all power and operate controls to relieve pressures. Lower equipment to the ground.
Stop the engine and allow machine to cool.
Securely support any machine components that must be raised for service.
Keep all parts in good condition and properly installed. Fix damage immediately. Replace worn or broken parts.
Remove any buildup of grease, oil, dirt, or debris.
Disconnect battery before performing any maintenance on electrical system.
SECTION 2
SAFETY
2-5