Data Management - Hach HIAC ROC User Manual

Data management

Load the settings
1. From the main menu, select the Load Settings icon.
2. Enter a location and a file name.
3. Click Open.
Save the settings to a computer
1. From the main menu, select the Save Settings icon.
2. Enter a location and a file name.
3. Click Save.
To see the current data
1. From the main menu, select the Current Data tab.
2. Click a down arrow (next to each record) to see the particle count data, average particle count
data and temperature.
3. To see the errors for an individual data record, move the cursor over the Status text that is
located on the right side of the screen. A window opens and shows the error code and a text
description of the errors.
To see the diagnostic data for the last sample
From the main menu, select the Diagnostics tab. If there is an alarm condition, a red flag is shown
(Figure 8).
English 15