Product Record; Serial Plate Location; Grounding Instructions - Kenmore 790.4030 SERIES Use & Care Manual

Grounding Instructions

Avoid fire hazard or electrical shock. Do
not use an adaptor plug, an extension cord, or remove
grounding prong from electrical power cord. Failure to
follow this warning can cause serious injury, fire or death.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and
should be plugged directly into a properly grounded
receptacle. DO NOT cut or remove the grounding
prong from this plug.
Grounding
type wall
receptacle
Power supply cord with 3-prong
grounding plug
For personal safety, this oven must be properly
grounded. For maximum safety, the power cord must
be plugged into an electrical outlet that is correctly
polarized and properly grounded.
If a two-prong wall receptacle is the only available
outlet, it is the personal responsibility of the consumer to
have it replaced with a properly grounded three-prong
wall receptacle installed by a qualified electrician.
See the installation instructions packaged with
this oven for complete installation and grounding
instructions.
Important Safety Instructions
Do not, under any
circumstances,
cut, remove,
or bypass the
grounding prong.

Product Record

In this space below, record the date of purchase, model
and serial number of your product. You will find the
model and serial number printed on the serial plate.
790.
Model No. __________________________________
Serial No. ___________________________________
Date of purchase ____________________________
Save these instructions and your sales receipt for future
reference.

Serial Plate Location

You will find the model and
serial number printed on the
serial plate. The serial plate
is located along the interior
side trim and visible when the
oven door is opened.
Remember to record the
serial number for future
reference.
Please carefully read and save these
instructions
This Use & Care Manual contains general operating
instructions for your appliance and feature
information for several models. Your product may not
have all the described features. The graphics shown
are representative. The graphics on your appliance
may not look exactly like those shown. Common
sense and caution must be practiced when installing,
operating and maintaining any appliance.
6
Serial Plate
Location