Machine Socket Unit Attaching And Removing - Janome Memory Craft 3000 Service Manual

Machine socket unit attaching and removing

(TO REMOVE)
1. Remove the front panel unit, Board C and base unit.
2. Cut off the cord binder (B) and pull out the connectors (D & E) from Boards A and C.
3. Remove 2 screws (H) and machine socket unit (F).
(TO ATTACH)
4. Attach the machine socket unit (F) with 2 screws (H).
5. Secure the cords with a cord binder (B) and insert the connectors (D &E).
Attach the base unit, Board C and front cover unit.
22