Do you have a question about the Memory Craft 300E and is the answer not in the manual?
Questions and answers
Richards, Gwendolyn
February 12, 2025
How do I save a design on a thumb drive and use it in my Janome 300E machine?
1 comments:
Mr. Anderson
February 12, 2025
The Janome Memory Craft 300E does not support saving designs directly to a thumb drive. Instead, you need to save the design onto an ATA PC card. To do this:
1. Press the Save File key to open the Save File window. 2. Select the storage location by pressing the Built-in/Card key. 3. If needed, assign a name to the file using the File Name key. 4. Use the Page Keys to navigate through saved files. 5. Press OK to save the design.
After saving, insert the ATA card into the machine to access and stitch the design.
This answer is automatically generated
Ann Thomas
May 20, 2025
Can I print a poem with the Janome Memory Craft 300E
Page 2
KNOW YOUR MACHINE ....................GETTING READY TO SEW ..................KEY OPERATIONS ....................EMBROIDERY SEWING ................... CARE AND MAINTENANCE ..................
Page 23
Screen Contrast Eco Mode inch/mm inch Register...
Page 24
Key Position Adjustment Maximum Speed Set Sewing Light Register Key Position Adjustment PRESS MARK ( ) Key Position Adjustment Thread selection Robison- Madeira Mettler Janome Anton Format Built-in Memory ATA PC Card Reset all to defaults Register...
Page 26
Designs Hoop Size A(F): 126 110mm Edit Mode Index Changing needles Inserting the bobbin Threading the machine Winding the bobbin Changing needles...
Page 33
Gothic A(F) Font Edit Mode Gothic A(F) Font Edit Mode Gothic A(F) Font Edit Mode Ready to Sew 3 min 1 Color Bear Size 52x19mm A(F): 126x110mm Bear Color Change Edit Mode...
Page 34
Ready to Sew 3 min 1 Color Bear Size 52x19mm A(F): 126x110mm Bear Color Change Edit Mode...
Page 35
Gothic A(F) Font Edit Mode Letters A(F) Font Edit Mode Letters A(F) Font Edit Mode Ready to Sew 7 min 1 Color Size 53x62mm A(F): 126x110mm Color Change Edit Mode...
Need help?
Do you have a question about the Memory Craft 300E and is the answer not in the manual?
Questions and answers
How do I save a design on a thumb drive and use it in my Janome 300E machine?
The Janome Memory Craft 300E does not support saving designs directly to a thumb drive. Instead, you need to save the design onto an ATA PC card. To do this:
1. Press the Save File key to open the Save File window.
2. Select the storage location by pressing the Built-in/Card key.
3. If needed, assign a name to the file using the File Name key.
4. Use the Page Keys to navigate through saved files.
5. Press OK to save the design.
After saving, insert the ATA card into the machine to access and stitch the design.
This answer is automatically generated
Can I print a poem with the Janome Memory Craft 300E