Datalogic GRYPHON M SERIES Quick Reference page 11

GRYPHON™ M
4.
5.
Read the Bind code to pair the Gryphon™ M to the cradle.
The reader is dedicated to the cradle. Any previously bound reader will
be excluded.
To connect several readers to the same cradle see the following section
"Using Multiple Readers with Same Cradle".
The green LED on the Gryphon™ M will blink: the reader is ready to be
positioned onto the cradle.
6.
Firmly position the reader onto the cradle within 10 seconds, a beep will
be emitted, signaling that the OM-GRYPHON cradle has been paired to
the Gryphon™ M, and the green LED on the reader will go off.
Green LED
YOUR READER IS NOW CONFIGURED TO READ BARCODES USING THE
DEFAULT VALUES.
Configure the OM-GRYPHON cradle, refer to the "OM-GRYPHON
7.
Quick Reference".
Exit and Save configuration
Bind
UK/US
5