Product Information - Philips CEM220 User Manual

9 Product
information
Note
•
Product information is subject to change without prior notice.
Power supply
Fuse
Suitable speaker
impedance
Maximum power output 50 W x 4 channels
Continuous power
output
Pre-Amp output
voltage
Subwoofer output
voltage
Aux-in level
Dimensions (W x H x D) 188 x 58 x 190mm
Weight
Radio
Frequency range 87.5 - 108.0 MHz (Europe)
- FM 87.5 - 107.9 MHz
(American)
Frequency range - 522 - 1620 KHz (Europe)
AM(MW) 530 - 1710 KHz
(American)
Usable sensitivity
- FM 8 V
Usable sensitivity -
AM(MW) (S/N =
20 dB) 30 V
12 V DC (11 V - 16 V),
negative ground
15 A
4 - 8
24 W x 4 channels
(4 10% T.H.D.)
2.0 V ( USB play mode;
1 kHz, 0 dB, 10 k
load)
2.0 V (USB play mode:
61 Hz, 0 dB, 10 k
load)
300 mV
1.36 kg
Compatible USB devices:
• USB fl ash memory (USB 2.0 or USB1.1)
• USB fl ash players (USB 2.0 or USB1.1)
• memory cards (SD / MMC / SDHC)
Supported formats:
• USB or memory fi le format: FAT16, FAT32
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
• Empty albums: an empty album is an album
that does not contain MP3/WMA fi les, and
is not be shown in the display.
• Unsupported fi le formats are skipped. For
example, Word documents (.doc) or MP3
fi les with extension .dlf are ignored and
not played.
• AAC, WAV, PCM audio fi les
• DRM protected WMA fi les (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA fi les in Lossless format
• ISO9660, Joliet
• Maximum title number: 512 (depending on
fi le name length)
• Maximum album number: 255
• Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
• Supported Bit-rates: 32~256 (kbps),
variable bit rates
EN 21