Turn On; Set Clock - Philips CEM220 User Manual

5
Install the sleeve into the dashboard and
bend the tabs outward to fi x the sleeve.
Note
•
Skip this step if the unit is not fi xed by sleeve but by
supplied screws.
6
Place the supplied rubber cushion over the
end of the mounting bolt.
7
Slide the unit into the dashboard until you
hear a click sound.
8
Reconnect the negative terminal of the car
battery.
Attach the front panel
1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel and point
the left hole at the left pillar.
4
Release the panel to engage the left side.

Turn on

1
Press to turn on the unit.
• To turn off the unit, press

Set clock

1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until the
currently time is displayed.
3
Turn clockwise to set hour.
4
Press to confi rm.
5
Turn anti-clockwise to set minute.
6
Press to confi rm.
for 3 seconds.
EN 11