Mount In The Dashboard - Philips CEM220 User Manual

4
Connect the supplied standard connector
to the unit.

Mount in the dashboard

1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
• If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
• If the car battery is not disconnected,
to avoid short-circuit, ensure that bare
wires do not touch each other.
2
Remove the two screws on the top of the
unit.
3
Remove the mounting sleeve with the
supplied disassembly tools.
10 EN
4
Ensure that car dashboard opening is
within these measurements: