Adjust Sound; Adjust Volume; Mute; Turn Dynamic Bass Boost (Dbb) On/Off - Philips CEM220 User Manual

6 Adjust sound

Adjust volume

1
Turn clockwise/anticlockwise to
increase/decrease volume.

Mute

You can turn off the sound of your audio.
1
During play, press MUTE .
• To turn the sound back on, press
MUTE again.
Turn Dynamic Bass Boost
(DBB) on/off
1
Press DBB for 3 seconds, the current
setting is displayed:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : The DBB function is off.
2
Press DBB again for 3 seconds to change
the DBB setting.

Select preset equalizer

1
Press EQ/Audio.
»
The current Equalizer setting is
displayed.
2
Press EQ/Audio again repeatedly to select
a preset EQ:
• [USER] (user)
• [FLAT] (fl at)
• [POP] (pop)
• [TECHNO] (techno)
• [ROCK] (rock)
• [CLASSIC] (classic)
• [JAZZ] (jazz)
• [OPTIMAL] (optimal)

Other sound settings

You can also edit user preset EQ.
1
Press EQ/Audio for 3 seconds.
2
Press or repeatedly to select the item
to be adjusted:
• [BAS] (bass) range: -7 to +7.
• [MID] (bass) range: -7 to +7.
• [TRE] (treble) range: -7 to +7.
• [BAL] (balance) range: 12L to 12R. (L
= left speaker, R = right speaker)
• [FAD] (fader) range: 12R to 12F. (R =
rear speaker, F = front speaker)
• [LPF] (low pass fi lter) range: 60, 80,
100, 200.
• [MPF] (mid pass fi lter) range: 500, 1K,
1.5K, 2.5K.
• [HPF] (high pass fi lter) range:10K,
12.5K, 15K, 17.5K.
• [SW ON]/[SW OFF] (subwoofer
volume on or off)
• [SW VOL] (subwoofer volume) range:
0 to 15.
3
Turn to select a value.
4
Press to confi rm.
EN 17