Troubleshooting; Problems And Solutions - Hoover 5007PH Manual

Troubleshooting

Problems and Solutions

If you come across a problem, please refer to the troubleshooting checklist below. If the problem still
persists, please contact Hoover Customer Care for further assistance.
Fault
The cleaner will not turn on.
The vacuum performance
is deteriorating.
The cleaner makes an
abnormal sound when
switched on.
Light on suction control dial is
illuminated or flashing.
Please contact Hoover Customer Care: 1300 360 845 or NZ: (09) 263 7573 to find your
local spare parts provider or for further assistance.
Part
Filter Set
Bag Holder
Dust Bag 5Pk
Hose Assembly
Rod
Solutions
Check that the power cable is inserted securely; remove from the
power supply and then reinsert into the power supply.
Check that the on/off switch is in the "ON" position.
Check the appliance to ensure there are no blockages.
Clear any blockages that may be found.
Check that the air-inlet filter is not dusty; frequently clean rubbish or
replace air-inlet and air-outlet HEPA filters every 6 months.
Turn off the cleaner immediately.
Check the appliance to ensure there are no blockages.
Please clear any blockages that may be found.
This can be caused by a full dust bag or blockage within the hose
or rod.
Part Number
32200832
33101201
32410222
31210073
31300564
15.