Installation Details; Installation Place - Midea MFM-24ARN1-Q Service Manual

Floor Standing MFM DM16-01.01.25en
6．Installation details

6.1 Installation place

6.1.1 Indoor Unit
a. A place which provides the spaces around the indoor unit as required above in the diagram.
b. A place where is no obstacle near the inlet and outlet area.
c. A place which can bear the weight of the indoor unit.
d. A place which allows the air filter to be removed downward.
e. A place where the reception range is not exposed to direct sunlight.
f. In the center of the room where possible.
6.1.1.1 Please stand the unit in hard and flat ground;
Please reserve space for installation and maintenance.
Note: All the pictures in this manual are for explanation purpose only. They may be slightly different from the air
conditioner you purchased(depend on model). The actual shape shall prevail.
6.1.2 Outdoor Unit
6.1.2.1 Before installing the outdoor unit, you should:
a). Select a place where no direct sunlight or other heat-radioactivity may reach. A sunshade is needed if it is
unavoidable.
b). Select a place that is easy to connect indoor unit's pipe and electric wires.
c). Avoid a place where combustible gas may leak or stay.
d). Keep it in mind that water may drain out of the outdoor unit while in "Heat" mode.
Caution:
Installation in the following places may cause trouble. If it is unavoidable to use in such places, please consult with
the dealer.
a. A place full of machine oil.
b. A saline place such as coast.
c. Hot-spring resort.
d. A place full of sulfide gas.
e. A place where there are high frequency machines such as wireless installation, welding
machine, medical facility.
f. A place of special environmental conditions.
6.1.2.2 If the outdoor unit is to be installed on a roof or where no constructions are around, you should avoid hard
wind blows directly to the air outlet, because it may cause trouble for air-flow shortage.
Service manual 14