10.0 Test Equipment - Motorola GP200 Series Service Manual

Test Equipment

10.0 Test Equipment

Table 3-2 lists test equipment required to service the GP200/500 Series and other two-way radios.
Motorola Part
Number
R2670_ Comms System Analyzer
with FDMA
RLN4498_ Analog Trunking
Smartnet/Zone
1580357B77 Canvas Case
* WADN4133_
* R1072_ Digital Multimeter
* R1377_ AC Voltmeter
* R1440_ Wattmeter,
* 0180305F29 Plug-in Element
* 0180305F38 Plug-in Element
* 0180305F46 Plug-in Element
* RLN5417_ Carry case for Wattmeter
* T1013_ RF Dummy Load
WADN4243_ Power Supply (220V)
S1339_/220 RF Millivolt Meter
0100855414 RF Cable
Table 3-2 Recommended Test Equipment
Description
Oscilloscope
Characteristics
This monitor will
substitute for items
with an asterisk*.
Protects Units
Analog 2 Channel
40MHz bandwidth,
5mV/cm - 20 V/cm.
100µV to 300V, 5Hz -
1MHz, 10Mohm input
impedance.
Thruline 50-Ohm,
±5% accuracy.
5W, 100-250MHz
5W, 200-500MHz
5W, 400-1000MHz
plus elements
Bench top
100mV to 3 V RF.
10kHz to 1.2GHz
2 male BNC Conn.
1.5m (3 pcs needed)
Application
Frequency/deviation meter and
signal generator for widerange
troubleshooting and alignment
Option for R2670_.
when used in the Field.
Waveform measurements.
AC/DC voltage and current
measurements.
Audio voltage measurements.
Transmitter power output
measurements.
Programmable
RF level measurements.
3-19