Motorola GP200 Series Service Manual page 41

Test Mode
3.1.3 Keypad
Test the keypad as follows:
1. Press 0, view "48/1"; release, view "48/0".
2. Press 1, view "49/1"; release, view "49/0".
3. Press 2, view "50/1"; release, view "50/0".
4. Press 3, view "51/1"; release, view "51/0".
5. Press 4, view "52/1"; release, view "52/0".
6. Press 5, view "53/1"; release, view "53/0".
Press 6, view "54/1"; release, view "54/0".
7.
8. Press 7, view "55/1"; release, view "55/0".
9. Press 8, view "56/1"; release, view "56/0".
10. Press 9, view "57/1"; release, view "57/0".
11. Press *, view "58/1"; release, view "58/0".
12. Press #, view "59/1"; release, view "59/0".
13. Press <, view "128/1"; release, view "128/0".
14. Press HOME, view "129/1"; release, view "129/0".
15. Press >, view "130/1"; release, view "130/0".
16. Press Option Select1, view "135/1"; release, view "135/0".
17. Press Option Select2, view "136/1"; release, view "136/0".
18. Press Option Select3, view "137/1"; release, view "137/0".
19. Pressing SB2 for 3 seconds in the Control Head Test mode will cause the radio to return to
the RF Test mode.
Item No. of
No. Beeps
1 1
BKC
2 1
BKC
3 2
BKC
4 3
BKC
5 5
BKC
6 8
BKC
7 9
BKC
8 11
BKC
9 12
BKC
Table 4-2 Test Environments
Description
Carrier Squelch RX: unsquelch if carrier detected
TX: mic audio
Tone RX: unsquelch if carrier and tone (192.8Hz) detected
Private-Line TX: mic audio + tone (192.8Hz)
Digital RX: unsquelch if carrier and digital code (131) detected
Private-Line TX: mic audio + digital code (131)
Dual-Tone multi- RX: unsquelch if carrier detected
ple frequency TX: selected DTMF tone pair
Open squelch RX: constant unsquelch
OSQ TX: mic audio
Trunking Low RX: unsquelch if carrier detected
Speed TLS TX: mic audio + connect tone (105-8 MHz)
Trunking High RX: unsquelch if valid outbound signalling word (OSW) detected
Speed THS TX: 1500Hz tone
CMP RX: unsquelch if carrier detected
TX: mic audio
LLE RX: unsquelch if carrier detected
TX: mic audio
Function
4-3