Removing A Device From The Nec Versabay Iii - NEC Versa LX Manual

Read: max 20x, cdrw max 14x; write: 1x, 2x, 4x speed
Hide thumbs Also See for Versa LX:
Table of Contents

Advertisement

Removing a Device from the NEC VersaBay III

Follow these steps to remove a device from the NEC VersaBay III.
1.
Save your files.
Either shut down Windows and power off the NEC Versa, or use warm or hot swapping,
2.
which is available with the NEC VersaBay III Swapping utility. The Swapping utility is
provided on the Application and Driver CD that ships with the system.
Close the LCD panel and locate the NEC VersaBay III on your system.
3.
For the NEC Versa LX and LXi, the NEC VersaBay III is located on the front of the
system.
For the NEC Versa SX, the NEC VersaBay III is located on the right side of the system.
Turn the NEC Versa upside down and locate the release lock (see the figure on the
4.
following page). Slide the release lock to the unlocked position.
2 NEC VersaBay III CD-RW Drive Pak
NEC Versa LX and LXi
A - NEC VersaBay III
NEC Versa SX
A - NEC VersaBay III

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Versa LX and is the answer not in the manual?

This manual is also suitable for:

Versa lxiVersa sx

Table of Contents