Setting Page; Geometry Setting; Channel Setting - Telefunken TF-LED15S18 Instruction Manual

Operation

Setting page

Setting
DNR
Smart switch
Startup setting
Language
TTX language
Color system
Watch time limit
Time setting
Restore to default
• DNR: Digital noise reduction effect for
reducing the video noise level: Off/On, if the
broadcast signal received is weak.
• Smart switch:
Switch: when the connected external device
is turned on, the TV will automatically switch to
the corresponding source mode.
Display: when the connected external
device is turned on, the TV will show a
prompt message; select OK to switch to the
corresponding source mode.
Off: disable Smart switch function.
• Startup setting: you can select the default
startup picture, captore picture (Logo) and no
startup picture (Off).
• Language: select the language of the
OSD menu.
• TXT Language: select the language of the
teletext subtitles. If selected teletext language
does not correspond to the program language,
subtitles can be diplayed incorrectly.
• Color system: PAL/SECAM/NTSC.
• Watch time limit: set the period of time for
you to watch the TV; when the time elapses,
the TV will switch off automatically. You must
enter the password first (the default password
is 0000; you can also assign your own
password in PW Modify menu). If you forgot
your password, you can use 0432 code.
• Time setting:
Current time: set the current time.
Turnon repeat: Select the mode of TV turn-
on at a specific time (Off/Once/Everyday).
Note: If Off is selected, Turnon time, Wake
source and Wake channel are unavailable.
Turnon time: set the time at which the TV will
10
10
turn on automatically.
Wake source: select the source mode to
which the TV will automatically turn on.
Wake channel: select the channel to which
the TV will automatically turn on (available only
if TV is selected as Wake source).
Turnoff repeat: Select the mode of TV turn-off
at a specific time (Off/Once/Everyday). Note: If
Off is selected, Turnoff time is unavailable.
Turnoff time: set the time at which the TV will
turn off automatically.
Sleep time: set the period after which the TV
will audomatically turn off (0 - 120 minutes).
• Restore to default: reset the parameters
to initial factory settings.
Geometry setting (only for PC mode)
Geometry
Auto adjust
H position
V position
AD clock
Phase
• Auto adjust: automatical setting of the
parameters.
• Horizontal Position: adjust horizontal
position of the image.
• Vertical Position: adjust vertical position
of the image.
• AD clock: adjust the image frequency
manually.
• Phase: adjust the phase manually.

Channel setting

Channel
Auto tuning
Intellegent tuning
Manual tuning
Fine-tune
Sound system
Channel edit
• Auto tuning: press OK button to start
automatic search of available channels. To
stop the process press MENU or EXIT button.
• Intellegent tuning: This operation will