Limits Of Use; Responsibilities; Hazards Of Use - Agatec RL110 User Manual

Adverse Use
• Use of the product without instruction.
• Use outside of the intended limits.
• Disabling safety systems.
• Removal of hazard notices.
• Opening the product using tools, for example screw- driver, unless
this is specifically permitted for certain functions.
• Modification or conversion of the product.
• Use after misappropriation.
• Use of products with obviously recognizable damages or defects.
• Use with accessories from other manufacturers without the prior
explicit approval of Agatec.
• Inadequate safeguards at the work site, for example when using on
or near roads.
• Deliberate dazzling of third parties.
• Controlling of machines, moving objects or similar monitoring application
without additional control and safety installations.
WARNING
Adverse use can lead to injury, malfunction and damage. It is the task
of the person responsible for the equipment to inform the user about
hazards and how to counteract them. The product is not to be operated
until the user has been instructed on how to work with it.

Limits of Use

Environment
Suitable for use in an atmosphere appropriate for permanent human
habitation: not suitable for use in aggressive or explosive environments.
DANGER
Local safety authorities and safety experts must be contacted before
working in hazardous areas, or in close proximity to electrical installations
or similar situations by the person in charge of the product.

Responsibilities

Manufacturer of the product
Agatec SAS, 21, boulevard Littré, F-78600 Le Mesnil Le Roi, hereinafter
referred to as Agatec, is responsible for supplying the product, including
the user manual and original accessories, in a completely safe condition.
16
Manufacturers of non Agatec accessories
The manufacturers of non Agatec accessories for the product are
responsible for developing, implementing and communicating safety concepts
for their products, and are also responsible for the effective- ness of those
safety concepts in combination with the Agatec product.
Person in charge of the product
The person in charge of the product has the following duties
• To understand the safety instructions on the product and the instructions
in the user manual.
• To be familiar with local regulations relating to safety and accident
prevention.
• To inform Agatec immediately if the product and the application
becomes unsafe.
WARNING
The person responsible for the product must ensure that it is used in accor-
dance with the instructions. This person is also accountable for the training
and the deployment of personnel who use the product and for the safety
of the equipment in use.

Hazards of Use

WARNING
The absence of instruction, or the inadequate imparting of instruction, can
lead to incorrect or adverse use, and can give rise to accidents with
far-reaching human, material, financial and environmental conse- quences.
Precautions:
All users must follow the safety directions given by the manufacturer and
the directions of the person respon- sible for the product.
CAUTION
Watch out for erroneous measurement results if the product has been
dropped or has been misused, modified, stored for long periods or
transported.
Precautions:
Periodically carry out test measurements and perform the field
adjustments indicated in the user manual, particularly after the product
has been subjected to abnormal use and before and after important
measurements.
EN
17