FUTABA cgy750 Instruction Manual page 90

S.BUS B
(12) S.Bus data reset
This resets the S.Bus channel assignments
back to the defaults. Press the data [+] key and
[Exec ??] will be displayed as a confirmation.
Press data [+] to confirm the reset back to the
default settings.
S
ASIC ETTING
(8) S.Bus setting: ELE gain
channel [default: 10ch]
Using the data [+] or [-] keys to
set the correct channel number.
(9) S.Bus setting: RUD gain
channel [default: 5ch]
Using the data [+] or [-] keys to
set the correct channel number.
(10) S.Bus setting: RPM chan-
nel [default: 7ch]
Using the data [+] or [-] keys to
set the correct channel number.
 6%XV VHWWLQJ *29 RQRII
channel [default: 8ch]
Using the data [+] or [-] keys to
set the correct channel number.
90