FUTABA cgy750 Instruction Manual page 48

S B
WASH ASIC
direction and amount of throw allowed for each
function. Think of this as the maximum travel
endpoint for each function, except you want
to set this to the maximum amount of cyclic/
collective pitch you would like available to the
CGY750. Use the Data [+] or [-] key to make
an adjustment.
If any of the functions operate the incorrect di-
S
ETTING
(10) Servo neutral adjustment
[default: 0μS]
TIndividual neutral adjustment
for each of the swash plate ser-
vos. All servo arms should be
perfectly perpendicular to the
control linkage with the collective
stick positioned at 0 degrees col-
lective (usually centered). The
ELE2 neutral adjustment only
works if the H4-xx swash plate
type has been selected.
To use this function select the
servo you would like to adjust
and press the data [+] or [-] key
to position the servo as desired.
(11) Swash AFR (rate adjust-
ment) [default: 50%]
48