Module Removal - Triax HDMI module 492030 User Manual

1 Slide the module
into a slot
2 Push the module
untill the fastener
clicks into place

Module removal

You install an input module by sliding the module into a module slot in the
input section of the headend unit and push it till the module clicks into place.
Note
You can use hot swapping when you insert an input module into
or remove an input module from the TDX system.
It is possible to remove an input module from a module slot without using
any tools, just use your fingers to press the fastener downwards and then
pull the module outwards to remove it from the module slot.
1) Press the fastener downwards
2) Pull the module out-
wards to remove it
from the module slot
5
Basics