Triax HDMI module 492030 User Manual page 11

When you have selected the service, click the Submit button to enter this
information into the headend system and return to the Input window.
On any frontend
module you can
power cycle the
module by clicking
this "Reset input"
button
Click the Submit
button to save
your selections
Now the selected services are available in the TDX service pool.
Remember to click the Apply button in the upper right-hand corner to save
new settings in the configuration.
Note
When you display the Configuration window for an input module
that has been configured, all fields are filled in and services have
been selected.
If you want to change the existing bitrate and video codec just
follow the same procedure as when you configure an input
module for the very first time.
TDX Service Tool
11
Click the All button
to select the service
in the list
or
Click the square to
select the service