Electrical Wiring; Standard Wiring - Hitachi PC-P5H Installation And Operation Manual

- When Using Switch Box
Prepare field-supplied JIS Box (JIS C 8336-1988).
?
M4 Screws
(Field Supplied)
4. Attach the controller onto the holding
bracket.
At first, attach the upper side, and then
the lower side.
3.

ELECTRICAL WIRING

3.1.

STANDARD WIRING

Controller
ELECTRICAL WIRING
JIS Box
(JIS C8336 – 1988)
Band
Ring core
Controller
cable
Insert the connector
?
?
ATTENTION:
- Attach the ring core (black) (accessory)
when installing the unit.
- Insert the controller cable into
the ring core 2 turns as shown in
the left figure before connecting
to the terminal board.
2
If wiring is 0.75mm it is necessary
to peel the outside cover.
- Fix the cable by using the band
(accessory)
3