ABB ret650 Commissioning Manual page 32

Transformer protection

Hide thumbs Also See for ret650:

Table of Contents

Section 3

Starting up

IEC09000357 V1 EN

Figure 5:

Select the TCP/IP protocol and open Properties

Select Obtain an IP address automatically if the parameter DHCPServer is

set to On in the IED.

IEC09000358 V1 EN

Figure 6:

Select: Obtain an IP address automatically

Select Use the following IP address and define IP address and Subnet mask if

the front port is used and if the IP address is not set to be obtained

automatically by the IED, see

the IP address chosen for the IED.

IEC09000357-1-en.vsd

IEC09000358-1-en.vsd

Figure

7. The IP address must be different from

1MRK 504 126-UEN -

Commissioning Manual

Table of Contents