Brother WD-200 SERIES User Manual page 15

3
Connect the supplied AC adapter to the control box to
fully charge the internal battery.
[Note] Before you use the battery for the first time,
4
Connect the video input cable of the head display to the
control box.
5
Connect the video input cable or an HDMI connecting
port to the control box.
[Note]


charge it fully. For more information, see page 42.
The only supported resolution for input
devices is 1280 × 720 p. If a device with a
different resolution is connected, the screen
may not display correctly.
Use HDMI cables of up to 2 m.
15