Before You Start; Assembly - Brother WD-200 SERIES User Manual

2. Before you start

Assembly

Assemble the AiRScouter and make connections according to
the following procedure:
1
Feed the cable along the cable fix slots of the flexible arm
and the head band, and then fasten it firmly.
2
Insert the internal battery into the control box:
a) Remove the cover
screws from the control
box, and then insert the
Li-ion rechargeable
battery.
b) After inserting the
battery, close the control
box cover and tighten
the screws.
[Important] Make sure you insert the battery in the correct way.
[Note] If you are not using the internal battery, connect the
14
Inserting the battery incorrectly will damage the
AiRScouter.
AC adapter to the control box.