Front Panel Guide - AEA RPQ2 Owner's Manual

{

FRONT PANEL GUIDE

1- Mic/Line switch:
OUT is Mic Input mode; IN is Line Input mode which bypasses the
mic preamp stage to accomodate line-level signals. The LED below
the switch will indicate when the Line Input mode is engaged.
2 - Mic Gain rotary switch:
This twelve-position switch selects from +13dB to +62dB of
preamplifier gain, as measured between the XLR input and the 1/4"
preamp output.
3 - Phantom Power (P48) switch:
OUT is off; IN applies full-spec P48 phantom power to the input. The
red LED below the switch will indicate when P48 phantom power is
engaged.
4 - Polarity Invert switch:
OUT is normal; IN is inverted.
5 - Output Level control:
This continuously variable control provides up to +19dB additional
output gain following the optional CurveShaper™ EQ circuitry. 0dB
marker on dial indicates unity.
6 - Low Frequency (LF) In switch:
OUT is bypass; IN inserts the -20dB low-cut shelving filter. The
green LED below switch will indicate when LF cut is engaged.
}
5