General Guidelines; Front Panel Guide - AEA TRP2 Owner's Manual

GENERAL GUIDELINES

To maintain the best performance from your new AEA TRP2, take
note of these two requirements:
1) Never place preamp on or close proximity to electro-magnetic
fields or hot surfaces. Electromagnetic fields created by power
transformers, motors, or RF transmitters can potentially damage
or interfere with the preamp functionality. Make sure to keep your
preamp away from these sources in addition to hot surfaces.
2) Before turning on the power, all connections to the preamp
should be made and the gain controls set at their minimum
settings. Be sure to examine your signal chain before powering up
the preamp to ensure sudden loud noises are not emitted which
could damage your system or hearing.

FRONT PANEL GUIDE

1- Input Gain rotary switch
12 position Grayhill switch ranging from +7 to +63 dB.
2 - Phantom Power (P48) switch
OUT is off; IN applies full-spec P48 phantom power to the input.
The red LED below the switch will indicate when P48 phantom
power is engaged.
5