General Guidelines; Front Panel Guide - AEA 500 Series Owner's Manual

GENERAL GUIDELINES

To maintain the best performance from your new AEA TRP500
preamp, take note of these three requirements:
1) Before powering up the unit, make sure the preamp is properly
secured and seated in the slot. Two flathead Phillips screws are
supplied with each preamp.
2) Never place the rack or preamp close to electromagnetic
fields or hot surfaces. Electromagnetic fields created by power
transformers, motors, or RF transmitters can potentially damage or
interfere with the preamp functionality.
3) Before turning on the power, all connections to the preamp
should be made and the Mic Gain and Output Level control set at
their minimum setting. Be sure to examine the signal chain before
powering up the preamp to ensure sudden loud noises are not
emitted which could damage your system or hearing.

FRONT PANEL GUIDE

1
2
3
4
5
6
5