Rear Panel Connections - AEA RPQ2 Owner's Manual

{

REAR PANEL CONNECTIONS

A- Balanced Output - XLR:
Female three-pin XLR: pin-1 is ground, pin-2 is high (+), and pin-3 is
low (-).
B - Balanced 1/4" Line In Input:
Line Input mode connector. Bypasses the mic preamp gain stage to
accommodate line-level signals. Depress the Mic/Line switch (ref.
#1) to utilize this Line Mode input.
C - Balanced 1/4" Preamp Output:
Direct output of preamp gain stage before EQ and Output Level
control.
D - Balanced Input - XLR:
Mic Input mode connector. Male three-pin XLR: pin-1 is ground, pin-
2 is high (+), and pin-3 is low (-).
}
7