Advanced Timer Recording; Manually Programming Timer Recordings - Panasonic DIGA DMR-BW750 Operating Instructions Manual

Advanced timer recording

Manually programming timer
recordings
HDD BD-RE BD-R RAM
1
Press [PROG/CHECK].
Timer Recording Remain HDD 30:30 DR
Channel Name
New Timer Programme
Total 0/32
OK
Timer Off
RETURN
2
Press [ e , r ] to select "New Timer
Programme" and press [OK].
3
Press [ w , q ] to select the items and
change the items with [ e , r ].
Timer Recording Remain HDD 30:30 DR
1 day
All DVB Channels
Channel Date/Week Start
21 FRI 23.01 13:10 13:50
[Prog.Name] ABC Asia Pacific News
FRI, 23 January 2009
ABC Asia Pacific News
ABC 2
13:00 - 13:59, 59 min.
Genre: News
Rating: G
OK
Favourites/AV
RETURN
Channel
Select the channel to record
"AV1" or "AV2" can be selected when "AV input" is selected
in "Favourites". You can select "All DVB Channels",
"Favourites 1", "Favourites 2", "Favourites 3", "Favourites 4"
or "AV input" by pressing the "Red" button only when
"Channel" is selected.
Date/Week
You can select current date up to one month later minus
one day. You can select "1day" or "Weekly" by pressing the
"Green" button only when "Date/Week" is selected.
Titles recorded using the same daily or weekly timer are
bundled and displayed as a "group" in the Direct Navigator
screen (➡ 40) except when using Auto Renewal Recording.
Start/Stop
Press and hold [ e , r ] to alter the Start (Start time) and
Stop (Finish time) in 15-minute increments.
Drive
Only 1 programme can be set to timer record on the disc.
When the recording drive is "BD" and there is not enough
remaining space, recording automatically switches to "HDD"
(➡ 35, Relief Recording).
Mode
Recording modes (➡ 30)
Renew (Auto Renewal Recording) (➡ 35)
Programme Name
Press [OK]. (➡ 76, Entering text)
RQT9428
34
FRI 23.01.2009 8:59
Schedule Drive/Mode Space
DEL Delete Page UP
CH
History List
Page Down
FRI 23.01.2009 8:59
Stop Drive Mode
HDD DR
Programme Name
CH
1 day/Weekly Page Down
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
Timer icon
" z " lights on the unit's display to indicate timer recording
standby has been activated.
od Space
OK
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
z
Check for available space
on HDD, etc., when "!" is
displayed.