Advanced Timer Recording Hdd; Manual Timer Recordings - Panasonic Diga DMR-BS750EB Operating Instructions Manual

Advanced Timer Recording

Manual timer recordings

This operation will only record from the tuner to
HDD in DR mode.
Preparation:
• Turn on the television and select the video input
terminal that this unit is connected to.
• Confirm that the clock on the unit's display is set
to the correct time.
e , r to select "New Timer
Programme", then
• If "New Timer Programme" is already selected,
press [OK].
w , q to move through the items
and e , r to set the items.
Channel: – The Channel number
You can press the "Red" button to
change "Category/AV".
You can perform this operation when
you select a box of "Channel".
[e.g., All Channels, Radio,
Registered Favourites, AV1, AV2 etc.
(➔ 97, freesat Favourites Edit)]
Day/Date: – You can set date or weekly
programme (➔ right, Tips).
Start (start time) / Stop (end time):
– Hold [ e ] or [ r ] to change in 15-
minute increments or decrements.
Drive: – HDD (You cannot change the drive.)
Mode: – DR mode (You cannot change the
recording mode.) (➔ 35)
• You can change it only when you
select AV1, AV2, AV3 or AV4 in
"Channel".
Renew: – Auto Renewal Recording (➔ 41)
ON/OFF
• You can change its setting only
when you select weekly programme
in "Day/Date".
Input Name – You can enter programme name.
Press [OK]. (➔ 84, Entering Text)
HDD
Timer Recording
Remain HDD 30:30 DR WED 19/08/2009 21:30
Channel Name Schedule Drive/Mode Space
New Timer Programme
OK Total 0/32
DEL Delete Info Page UP
CH
Turn Timer Off Resolve overlap
Page Down
RETURN
Timer Recording Remain HDD 30:30 DR WED 19/08/2009 8:59
All Channels
Channel Day/Date Start Stop Drive Mode
121 WED 19/08 13:10 HDD DR
[Prog.Name] BBC News at One
Input Name
BBS 1 CI
Category/AV
RETURN
– The timer icon is displayed in left column.
Timer icon
– " z " lights on the unit's display to indicate
timer recording standby has been activated.
– Check for available space on HDD, etc., when
"!" is displayed.
ode Space
OK
– Repeat steps
–
recordings.
– Press [ ^ ] to turn the unit off.
Notes
• " z " on the unit's display flashes when the unit cannot go to timer
recording standby (e.g., HDD has no space to record).
• If three timer recording times overlap, the first and second
recordings always have priority. The third recording will start only
after the first recording has finished.
Tips
To exit the timer recording list
Press [PROG/CHECK].
• "Date" Setting
Each press of [ e ] changes items in the order below.
(Each press of [ r ] changes items in the reverse order.)
Current date One month later
---
minus one day
Each press of the "Green" button changes item in the order below.
You can perform this operation when you select a box of
"Day/Date".
Date Weekly
Titles recorded using the same daily or weekly timer are bundled
and displayed as a "group" in the DIRECT NAVIGATOR screen (➔
45) except when using Auto Renewal Recording (➔ 41).
• You can also use the numbered buttons to enter "Channel", "Start"
and "Stop".
z
to programme other
39
RQT9430