Jinan QingQi QM50QT-6 Manual page 51

Trouble position Trouble
Exhaust noise is 1. The muffler is broke off
over big 2. The muffler is damaged
Exhaust system1
1. The muffler transmutes
Exhaust is not good 2. The muffler is damaged
The muffler is blocked
1. The bulb is bad
The engine works
2. The switch is bad
and the switch is in
3. The lead parts
ON position
4. The wire is not joined accurately
Motorcycle
lamp/ Instrument
switch
Although the lamp 1. The dynamo is damaged
is on , the brightness 2. The resistance of the wire or the switch is big
is weak The commutator or the adjustor is damaged
1. the acceleration cable parts or is blocked
The operation is The accelerator is
2. the acceleration is installed contrarily
out of control out of control
The free play of the acceleration grip is not correct
Reason The way of eliminating the trouble
1. Replace
2. Examine and repair
1. Replace
2. Examine and repair
Dredge/Replace
1. Replace
2. Replace
3. Wiring
4. Check and join the wire correctly
1.Examine and repair
2.Examine and repair
Examine and repair
1. Replace
2. Reinstallation
Adjust
51