Jinan QingQi QM50QT-6 Manual page 48

6. Familiar trouble about the transmission box and the way of the elimination
Position Trouble
1.There is too much oil
Leakage 2.The oil seal is worn or damaged
The crank shaft box rives
Alternator/ 1.
The engine does not
Starting 2.
work
clutch 3.
1. The proportion of the electrolyte is low
The engine motor 2. The cable of the battery is not joined correctly
rotates slowly 3. The cable of the motor is not joined correctly
4. The engine motor is bad
Electric
motor
1. The starter motor reverses
——The crank shaft case is installed wrong
The engine motor
——The wires are joined incorrectly
rotates， but the engine
does not rotate
2. The clutch set has breakdown
3. The engine gear driven or the idler is damaged
Reason
The starting clutch which is one way is damaged
The engine idler is damaged
The starting system is damaged
48
The eliminating the trouble
1.Empty the spare oil
2.Replace the oil seal
Replace the crank shaft box
1. Replace or examine and repair
the starting clutch which is one way
2. Replace the gear
3. Examine and repair
1. Replenish the electrolyte
2. Rejoin the cable
3. Joining well
4. Examine and repair the motor
1. ——Reinstalling
——Rejoining
2.Examine and repair
3.Replace the gear