Inspection Of The Tire; Inspecting The Quantity Of Fuel; Steering Bar; Tire Pressure - Jinan QingQi QM50QT-6 Manual

INSPECTION OF THE TIRE

1.

Tire Pressure

Observe the wear condition of the tire and determine
the tire pressure. If the tire pressure is abnormal, check it
with a tire pressure gauge and adjust it to the correct
value.
Inflation Tire Pressure
Front Wheel 125Kpa
Rear Wheel 175Kpa
2. Crack, Damage, Foreign Object and Abnormal
Wear
Check the surface of the tire:
Is there any obvious damage?
Are there any nail, stone, glass and etc
in the tire or in the tread?
Is there any abnormal wear?

INSPECTING THE QUANTITY OF FUEL

Make sure that the fuel is enough to reach the
destination or not. Turn the ignition switch to ON position,
if the fuel gauge hands points to the red region, the fuel
should be refilled as soon as possible.

STEERING BAR

Check if the turning is smooth or agile and if it has
no gap or it is not loose.
18