Jinan QingQi QM50QT-6 Manual page 37

Front brake adjusting nut
The clearance between the front brake lever and the
brake holder should be 10-20mm.Turn the front brake
adjusting nut clockwise or counterclockwise until you
reach the recommended clearance.
1.
Combined application of
recommended.
Quickly release the throttle grip to the
minimum position and squeeze the brake
levers.
It is most advisable to reduce the speed slowly
by gradual application of the brakes.
CAUTION
Single braking of the front or rear wheel
may cause the danger of side slide.
Hurried braking or sharp turning are the major
causes of side slides or overturn, and are
therefore extremely dangerous.
2.
Special care should be taken in rainy and snowy
days.
Moist and wet road surface may cause danger.
Sharp turning in the course of acceleration should
be avoided. An appropriate distance should be
37
both brakes is