Advertisement
Quick Links
Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Viking Doorbox or Entry Phone
The VE-LIGHT kit adds bright LED illumination to
any doorbox or entry phone that is housed in a
Viking VE-5x5, VE-6x7 or VE-5x10 enclosure. It
can also be used on Viking's E-1600A-BLT-EWP
tower phone.
The stainless steel bracket is easily mounted using
existing holes and hardware. Two bright white
LEDs are used as the light source, so there are no
filaments to break or bulbs to burn out.
If used with the W-1000, W-3000 or W-3005, the
VE-LIGHT can be wired directly to the AC power
input of the doorbox, or use the included 12 volt
power supply. Any power source between 12 and
24 volts, AC or DC can be used to supply the VE-
LIGHT with power.
Applications
• The VE-LIGHT is designed to be used in conjunc-
tion with the following Viking products
Viking Model
E-10A/EWP
E-30/EWP
E-30-PT/EWP
E-35/EWP
E-1600-20A/EWP
E-1600-30A/EWP
E-1600A-BLT-EWP
E-1600A-BLT2-EWP
K-1200/EWP
K-1205/EWP
K-1500-7
K-1700-3/EWP
K-1705-3/EWP
K-1900-7/EWP
K-1900-8/EWP
W-1000/EWP
W-3000/EWP
W-3005/EWP
PRODUCT MANUAL
Add Panel Lighting to Your
VE Model
VE-5X5 / SS
VE-5X5 / SS
VE-5X5 / SS
VE-5X5 / SS
VE-5X5 / SS
VE-5X5 / SS
(included)
(included)
VE-5x10 / SS
VE-5x10 / SS
VE-5x10 / SS
VE-6x7 / SS
VE-6x7 / SS
VE-5x10 / SS
VE-5x10 / SS
VE-5X5 / SS
VE-5X5 / SS
VE-5X5 / SS
VE-LIGHT shown above with Viking W-3000
• Ultra bright LEDs for long life
• Easy retro-fit to existing entry phones
DOD#
• Can use the same power source as doorbox
210
• Can be powered from 12 to 24 volts AC or DC
212
214
178
www.vikingelectronics.com
215
Information: (715) 386-8861
215
217
217
182
Power:
183
adapter provided or use any 12-24V AC or DC
352
source @ 50mA
157
Dimensions: 5" x 3" x 1"(127mm x 8mm x 25mm)
159
Environmental: -15°F to 130°F (-26°C to 54°C)
with 5% to 95% non-condensing humidity
364
Shipping Weights: 1 lb (0.45 kg)
362
Maximum Power Run: 1000 ft (304m) using 24
170
AWG wire
180
Material: 24 gauge Marine Grade 316 stainless
181
steel
VE-LIGHT
Enclosure Lighting
December 20, 2016
and VE-5x5 (not included)
Features
Specifications
120V AC/12V DC 500mA, UL listed
Kit
Advertisement
Related Manuals for Viking E-10A/EWP
Summary of Contents for Viking E-10A/EWP
- Page 1 Viking Doorbox or Entry Phone The VE-LIGHT kit adds bright LED illumination to any doorbox or entry phone that is housed in a Viking VE-5x5, VE-6x7 or VE-5x10 enclosure. It can also be used on Viking’s E-1600A-BLT-EWP tower phone. The stainless steel bracket is easily mounted using existing holes and hardware.
- Page 2 It is recommended that a surge protector be installed to protect against such surges. A. Using the Power Input Terminals of a Viking Doorbox When using the power terminals, make sure your product is listed in Diagram 1. If your product is not Step 1 listed please see section B below and wire using the included power supply.
- Page 3 Phone or Doorbox (E-30 shown, not included) Related Products Surface Mount Viking Products While Maintaining Weather and Vandal Resistance The VE-5x5, VE-6x7 and VE-5x10 add vandal For more information and weather resistance, as well as versatility to see DOD# 424 many Viking products.
- Page 4 Product Support: (715) 386-8666 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.