Advertisement
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
A. Using the Power Input Terminals of a Viking Doorbox
When using the power terminals, make sure your product is listed in Diagram 1. If your product is not
Step 1
listed please see section B below and wire using the included power supply.
Step 2 Disconnect power from the doorbox or phone.
Step 3 Remove the doorbox or phone from the surface mount box.
Connect the two wires from the VE-LIGHT to the power input terminals of the doorbox (see Diagram
Step 4
2). Note: Wires can be connected in either polarity.
Place the VE-LIGHT bracket against the upper mounting lip of the surface mount box and route wires
Step 5
through the provided slot (see Diagram 2).
Carefully place the phone or doorbox back into the surface mount box, making sure the wires stay in
Step 6
the slot (see Diagram 5).
Diagram 1
Viking Model
K-1200/EWP
K-1205/EWP
W-1000/EWP
W-3000/EWP
W-3005/EWP
B. Using the Included Power Supply (see Diagram 3)
Step 1 Disconnect power from the doorbox or phone.
Step 2 Remove the doorbox or phone from the surface mount box.
Connect the two wires from the VE-LIGHT to the included power supply using the included butt con-
Step 3
nectors (see Diagram 4). Note: Wires can be connected in either polarity.
Place the VE-LIGHT bracket against the upper mounting lip of the surface mount box and route wires
Step 4
through the provided slot (see Diagram 4).
Carefully place the phone or doorbox back into the surface mount box, making sure the wires stay in
Step 5
the slot (see Diagram 5).
Diagram 3
Viking Model
E-10A/EWP
E-30/EWP
E-30-PT/EWP
E-35/EWP
E-1600-20A/EWP
E-1600-30A/EWP
E-1600A-BLT-EWP
E-1600A-BLT2-EWP
K-1500-7
K-1700-3/EWP
K-1705-3/EWP
K-1900-7/EWP
K-1900-8/EWP
2
Installation
DOD#
182
Front View of the VE-LIGHT
183
170
180
IMPORTANT:
181
Wires MUST be
routed through
the provided slot.
DOD#
210
Front View of the VE-LIGHT
212
214
178
215
IMPORTANT:
215
Wires MUST be
routed through
217
the provided slot.
217
352
157
159
* Note: The gel-filled (water-tight) butt connectors are designed for insu-
364
lation displacement on 19-26 gauge wire with a maximum insulation of
0.082 inches. Do not strip wires prior to terminating.
362
Diagram 2
Not polarity
sensitive
Diagram 4
Not polarity
sensitive
Rear View of Viking Doorbox
(not included)
* (2) Gel-Filled
Butt Connectors
12V DC
(included)
Adapter
(included)
Positive
Negative
120V AC
Advertisement
