Remote Controller - Onkyo SBT-A500 Instruction Manual

> Before Start > Part Names

Remote Controller











> Install > Initial Setup






> Playback
1. Í button: Turns the unit on or into standby mode.
2. Input selector buttons: Switches the input to be played.
3. Q (QUICK MENU) button: You can perform common settings on the TV screen. (
4. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.
5. button: Displays the Setup menu. ( P41)
6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.
7. button: Temporarily mutes audio. Press again to cancel muting.
8. Listening mode buttons: Allows you to select the listening mode. (
9. Play buttons: You can start play of the Music Server or USB.
10. button: You can start repeat or random play of the Music Server or USB.
CLEAR button: Deletes all characters you have entered when entering text on the TV
screen.
11. DIALOG button: Switches the Dialog Enhancement setting. (
12.DIMMER button: You can adjust the brightness of the display in three steps. It cannot be
turned off completely.
13. button: Switches the information on the display.
14. button: Returns the display to the previous state during setting.
15.MODE button: Switches tuning to an FM station between automatic tuning and manual
tuning.
16.MEMORY button: Used to register FM radio stations.
Advanced Setup | Firmware Update | Others
P30)
P39)
30°
30°
Approx.5 m
(16 ft.)
E
N
P38)
7