Troubleshooting; Problems And Solutions - Hoover dual steam plus Manual

Troubleshooting

Problems and solutions

If you come across a problem, please use the checklist of troubleshooting tips before ringing
Hoover Customer Care.
Fault
The steamer will not switch on.
The steamer will not produce the
steam.
Water come out from the back of
the steam mop.
The steamer leave too much water
on the floor
Please contact Hoover Customer Care: 1300 360 845 (Australia), or (09) 263 7573 (New Zealand) to find your local
spare parts provider.
Solution
- Check the steamer is plugged in
- Plug the steamer to different socket
- Check the hard water filter is assembled
- Check the water is enough in the clean water tank
- Check there is no blockage from the accessory tool and mop head
- Replace a dry mop pad
- Too much detergent is added to the detergent tank.
19.