Recalling Services; Setting The Announcement Support Interruption; Receiving The Road Traffic Flash And Transport Flash; Receiving News Flash - Pioneer DEH-P80MP Operation Manual

Section
09 DAB tuner

Recalling services

You can recall services assigned to preset
numbers.
% Push Multi-Control up or down to recall
services.
Pushing Multi-Control up or down selects the
preset number. P1  P6 is displayed as the
preset number is selected.
The service assigned to the preset number is
recalled from memory.
Setting the announcement
support interruption
1 Use Multi-Control to select Announce.
Announce appears in the display.
2 Push Multi-Control left or right to select
the desired announcement support.
Push Multi-Control left or right until the de-
sired announcement support appears in the
display.
! Announce  Announcement
! Weather  Area weather flash
3 Press Multi-Control to turn the selected
announcement support interruption on.
# To turn the selected announcement support
interruption off, press Multi-Control.
Receiving the road traffic flash
and transport flash
1 Press TA to turn road traffic flash and
transport flash on.
Press TA and TA ON appears in the display.
The tuner will stand-by for traffic announce-
ments.
# To turn the road traffic flash and transport
flash off, press TA again.
44
En
2 Press TA while the road traffic flash and
transport flash are being received to cancel
the announcement interruption.

Receiving news flash

% Press TA and hold to turn news flash
on.
Press TA until NEWS ON appears in the dis-
play.
# To turn off news program interruption, press
TA and hold until NEWS OFF appears in the dis-
play.

Switching the service follow

1 Use Multi-Control to select SF.
SF appears in the display.
2 Press Multi-Control to turn on service
follow.
# To turn off service follow, press
Multi-Control.
Switching primary or
secondary service component
1 Use Multi-Control to select service com-
ponent selection.
Service component selection appears in the
display.
2 Press Multi-Control to select the desired
service component.
Press Multi-Control until the desired service
component appears in the display.