Introduction Of Advanced Tuner Operation; Storing Broadcast Frequencies; Recalling Broadcast Frequencies - Pioneer DEH-P80MP Operation Manual

Tuner
Introduction of advanced
tuner operation
1 Function display
Shows the function status.
1 Press Multi-Control to display the main
menu.
FUNCTION and AUDIO appear on the display.
2 Use Multi-Control to select FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn Multi-Control to select the func-
tion.
Turn Multi-Control clockwise to switch be-
tween the functions in the following order:
BSM (best stations memory)Regional (re-
gional)Local (local seek tuning)program
type selection (PTY)TA (traffic announce-
ment standby)AF (alternative frequencies
search)News (news program interruption)
# You can also switch between the functions in
the reverse order by turning Multi-Control coun-
terclockwise.
# To return to the frequency display, press
BAND.
# If MW/LW band is selected, you can only se-
lect BSM or Local.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
1

Storing broadcast frequencies

You can easily store up to six broadcast fre-
quencies for later recall.
1 When you find a frequency or a pro-
gram service name that you want to store
in memory press LIST to switch to the pre-
set channel list mode.
2 Use Multi-Control to select the preset
number.
Turn to change the preset number; press to se-
lect. 16 is displayed as the preset tuning
number is selected.
3 Press Multi-Control and hold to store
the radio station frequency in memory.
The selected radio station frequency has been
stored in memory.
# If you do not operate the list within about 8
seconds, the preset channel list mode is can-
celled automatically.
Notes
! Program service name is not displayed unless
the radio receives the frequency.
! Up to 18 FM stations, six for each of the three
FM bands, and six MW/LW stations can be
stored in memory.
! You can also store radio station frequencies
assigned to preset tuning numbers by press-
ing and holding one of the preset tuning but-
tons 16 on the remote control.
Recalling broadcast
frequencies
You can recall radio station frequencies as-
signed to preset tuning numbers.
Section
04
15
En